Industrial seawater reverse osmosis system

The Huaxin Industrial Seawater Reverse Osmosis Desalination System HX-SW-RO is a reverse osmosis membrane filtration process that has been commercially available since the early 1970s. Therefore, these systems vary in size; some are large desalination plants, while others are small devices that convert seawater into drinking water. First, a typical single-pass seawater treatment system consists of the following components:

Water source: Directly extracted from the ocean or the beach through wells

Pre-treatment: Such as using sand filters and activated carbon filters for filtration and chemical treatment.

High-pressure pump: To achieve the pressure required for reverse osmosis membrane filtration

Membrane module: To perform the desalination process, such as those from DuPont, Toray, etc.

pH adjustment: To adjust alkalinity or acidity.

Disinfection: To prevent the growth of any bacteria or organic matter, such as ultraviolet disinfectors.

Capacity range of industrial seawater reverse osmosis desalination system:

The Huaxin industrial seawater desalination reverse osmosis system offers a wide range of capacity options from 1000 liters per hour to 6 million liters per hour, with the corresponding maximum total dissolved solids content of the incoming water being 45000 milligrams per liter. Therefore, we provide standard industrial HX-SW-RO series plants, and we can also customize according to your water usage application requirements. From five-star resorts to the world's largest desalination plants, Huaxin  is always ready and capable of providing the highest quality industrial desalination systems.

The seawater desalination equipment of Huaxin can remove salt and impurities such as bacteria, sugars, proteins, dyes, and other components with a molecular weight greater than 150 - 250 daltons. Therefore, Huaxin provides a full range of standard and customizable seawater reverse osmosis desalination systems, including pre-treatment and circulating filtration systems.

What is the HX-SW-RO desalination system?

Therefore, the desalination system has become an important process for providing fresh water. Desalination provides another solution to address the shortage of clean water supply and the problem exacerbated by natural factors such as droughts.

The seawater reverse osmosis system uses reverse osmosis technology to purify impurities, minerals, bacteria, viruses, salt, and other components in untreated water. This process is achieved through the use of a high-pressure pump, which will press the salty seawater through a semi-permeable membrane. Additionally, it contains some small holes that can prevent impurities from passing through. The result of the reverse osmosis system is obtaining pure, pollution-free fresh water, and these pollutants will also be discharged together.

You can apply the seawater desalination system in large factories, which need to solve problems related to national regulations, company budgets, and actual operations to produce an economical and environmentally friendly water supply system. Therefore, there are hundreds of seawater desalination plants worldwide.

Is the seawater reverse osmosis desalination system cost-effective?

The construction and long-term operation costs of seawater reverse osmosis desalination equipment are relatively high. However, the latest developments in water treatment components, including the advancement of reverse osmosis membrane technology high retention rate, low energy cost, as well as energy recovery devices, have significantly reduced the costs of the desalination plant. As a result, today, desalination equipment has become an economical source of water supply. Therefore, most governments have begun to incorporate it into their water supply plans as a means to achieve current and future water supply goals.

What is the electricity consumption of the industrial reverse osmosis system?

Therefore, this depends on the treatment capacity of the reverse osmosis water purification plant, measured in liters per hour or per day. So, the power supply voltage range of our reverse osmosis water treatment system is 220 volts to 480 volts, with a frequency of 50 hertz or 60 hertz.